Applications
Temporary duct,
everywhere it's needed.
Any job that needs air moved from one place to another for a few hours needs temporary duct — and then needs it gone. Duct Bucket is built for the second half of that sentence as much as the first.
Confined space entry
Vaults, tanks, manholes, pits, silos and crawl spaces. Set the bucket at the blower, run the duct down the opening, ventilate the space for the duration of the entry.
When the entry is closed out, the duct comes back up and folds into the bucket. It doesn't get dragged through whatever is on the ground around the opening, and it doesn't end up as a coil in the back of the truck collecting punctures.
Always follow your own confined‑space program and applicable regulations for atmospheric testing, ventilation rates and attendant duties. Duct Bucket supplies the duct, not the procedure.
HVAC service and changeouts
Temporary supply and exhaust runs while permanent duct is open, being replaced, or being commissioned. Vent a furnace or air handler out a window during a changeout instead of into the space you're working in.
Handy on balancing and startup work where you need to route air somewhere for an hour and then need the floor clear again.
Disaster restoration
Water losses live and die on airflow. Duct the output of an air mover or the intake of a dehumidifier exactly where the moisture is — under a cabinet run, into a wall cavity, up a stairwell, out a window.
On a multi‑day dry‑out with equipment moving daily, packing duct back into a bucket instead of coiling it saves real time on every reset.
Industrial & welding fume extraction
Spot ventilation and local exhaust on jobs that move around a shop or a site. Position the pickup, run the duct back to the extractor, and relocate the whole setup in a couple of minutes when the work moves.
Abatement and dust control
Negative air machine ducting into and out of containment, exhausting to the outside. Runs get built and torn down constantly on these jobs, which is exactly the case where a self‑storing duct pays for itself.
Generators, heaters and small engines
Route exhaust or hot‑air discharge away from a work area, a doorway or an occupied space. Common on winter construction, tenting and temporary heat.
Match the duct to the temperature and the medium you're moving. Check the duct specification for your gauge before using it on any heated or combustion discharge.
Common thread
The job that keeps moving
Set up fast
One person, no reel to unwind and no coil to fight. Bucket down, walk the end out, done.
Tear down faster
The pack‑up is the part crews cut corners on. Making it a five‑second job is what keeps the duct in one piece over a season.
Scale by bucket
Need 50 ft on a bigger job? Bring a second bucket of the same gauge and couple it on.
Which gauge fits your gear?
Match the gauge to the equipment you're connecting to. Not sure? Tell us what you're running and we'll point you at the right one.